Terminal Connector, also known as plug connector. Terminal block is an accessory product used to realize electrical connection, which is industrially divided into the category of connectors. UK terminals are suitable for the interconnection of a large number of wires. In the power industry, there are special terminal blocks and terminal boxes, all of which are terminal blocks, single-layer, double-layer, current, voltage, ordinary, breakable, etc. . A certain crimping area is to ensure reliable contact and to ensure that sufficient current can pass. The terminal block is used to facilitate the connection of wires. It is actually a piece of metal sealed in insulating plastic. There are holes at both ends for inserting wires, and there are screws for fastening or loosening. For example, two wires, sometimes If they need to be connected, sometimes they need to be disconnected. At this time, they can be connected with terminals, and they can be disconnected at any time without having to weld them or twist them together, which is very convenient and quick. It is a component that electronic engineers and technicians often contact. Also known as plug jacks, plugs and sockets. Usually refers to an electrical connector. A device that connects two active devices to transmit electrical current or signals.
Wire Connection, which is an important accessory for enterprises to realize the connection of electrical equipment in China, is industrially divided into the category of connectors. Terminal blocks are used to facilitate the connection of wires. In fact, we use a piece of metal sealed in insulating plastic. There are holes at both ends, which can be directly inserted into wires. Terminal blocks can be mainly divided into WUK terminal blocks, pull-type terminal series, plug-in terminal series, etc.
Terminal Pins is a way to connect the positioning connector of China's electronic technology circuit. It is composed of two parts, namely the plug-in and the connector. Under normal working conditions, it can be completely separated without separation. The same place between the switch and the pin socket Because the student realizes the research purpose of the conversion of the connected circuit through the change of the contact state of the contact pair, therefore, the pin jack can also be called a connector.