1. Apply a layer of high-voltage insulating coating, which can play a certain insulating role and prevent short-circuit accidents caused by small animals. Terminal Connector is an accessory product used to realize electrical connection, which is industrially divided into the category of connectors. UK terminals are suitable for the interconnection of a large number of wires. In the power industry, there are special terminal blocks and terminal boxes, all of which are terminal blocks, single-layer, double-layer, current, voltage, ordinary, breakable, etc. . A certain crimping area is to ensure reliable contact and to ensure that sufficient current can pass. The terminal block is used to facilitate the connection of wires. It is actually a piece of metal sealed in insulating plastic. There are holes at both ends for inserting wires, and there are screws for fastening or loosening. For example, two wires, sometimes If they need to be connected, sometimes they need to be disconnected. At this time, they can be connected with terminals, and they can be disconnected at any time without having to weld them or twist them together, which is very convenient and quick.
2. Wrap the insulating sleeve on the conductive terminal and the wire, so that the conductor is completely covered and the insulation level is high. The size and thickness of the insulating sleeve can be determined according to the size of the conductor, and the colors are red, green, and yellow. These two measures, especially the second measure, have been widely used in power distribution equipment in the grid.
The cables should be fire and corrosion resistant, and the shafts for the cables should be coated with an organic paint (white). In the cable trench and bending hole, it should also be sealed, including a certain distance firewall, to ensure that the cable will not spread in the event of a fire, and the fire control is within a certain range.
Therefore, when packaging the Terminal Block leads, these details should be done to ensure good performance.
